Troubleshoot Garage Door

Just like all other electronic devices, garage door openers are bound to need some attention every now and then in order to function properly again. Luckily, when it comes to garage doors, the solutions to repairing any problems you may be having are usually quite simple. Most homeowners can usually identify and fix the most common problems themselves. Other problems may require the assistance of a professional garage door repairman. Read through the following common problems and remedies associated with garage door openers and which options for repair are likely to suit your needs best.

Your Remote or Wall Switch Does Not Work

This is a common problem many homeowners find themselves having, especially if they have owned their garage remotes or wall switches for a while. It can also happen out of the blue for other reasons, such as the motor becoming unplugged. If neither a wall keypad or remote work to open your garage, there is a chance that the motor has become disconnected. Check the motor of your garage door first to see if this is the case.

Your remote may not be working because it needs a battery replacement. If your remote control for your garage requires batteries, be sure to swap out the current batteries with some new ones. This is ones of the simplest and easiest fixes, so be sure to try this for your remote before you reset or reprogram your garage door.

Reprogramming your remote or wall switch may be necessary, if either or both are not working. Sometimes the signals can become disconnected and one or both devices may need to be reset. Because they are electronic signals, usually once this is done the system will work again right away. You may want to consult your garage door owner's manual to see how you can restart your remote or wall switch.

It is also possible that the remote or wall switch is not able to open or close the garage for reasons you cannot identify. You may need to call an expert to take a closer look at either your garage motor, remote or wall switch.

Your Garage Door Will Not Close or Will Only Close Partially

Having a garage door that will not properly close or will only close part of the way may indicate a couple of problems. The sensors on the garage door may be out of alignment, either when it comes to the close-limit switch or the door’s safety sensors. A close-limit is a switch within the motor that indicates when the motor should run and for how long when opening and closing the door. If this limit switch is set wrong, the motor may confuse when to start and stop running. Thus, the garage door may stop in the wrong position.

The second sensor is a safety sensor that automatically stops the garage door when there is something obstructing its path. Safety sensors are placed near the bottom of the garage door. In most cases, when the sensors hit something in their line of sight, the garage door will stop or it will stop and reverse the opposite way. If you have already checked to make sure there is nothing blocking the path of the garage door, then it is possible that faulty sensors are causing the garage door to stop in the wrong position.

Your Garage Door Reverses Before Touching the Ground

Garage doors have a control known as closing force. This control determines how much pressure is needed for the door to descend before the motor shuts off. When a garage door reverses before hitting the floor, adjust the close-force either according to your instruction manual or by calling a garage door expert to help you.

Your Garage Door Reverses Right After Touching the Ground

If your garage door reverses after it touches the ground, this may indicate a close-limit switch problem. Similar to when your garage door will not close in the proper position, your garage may be receiving the wrong signals and thus will not stop. Adjust the close-limit switch on your garage motor to see if this helps alleviate the problem.

Your Garage Door Does Not Open All the Way

Maybe you are finding that your garage door will not open all the way. This can be a problem because it may mean you are unable to get your car into or out of your garage. In this case, your garage door motor up-limit switch may need to be adjusted. Most up-limit switch problems present themselves right when a garage door is installed, so it is not likely that you will have this problem long after your garage has been installed. If you are experiencing this symptom, however, be sure to consult your garage door owner’s manual first to identify any other troubleshooting steps that may be helpful. Also, you can also always call a garage door repair specialist to assist you if you are stuck or unsure.

Call a Garage Door Expert for Assistance Today

Hiring a professional garage door repair specialist to come out and inspect your garage may be necessary if you are unable to troubleshoot your garage door. If you cannot identify the problem with your garage door or know you will need professional assistance, do not hesitate to call someone to help you. Garage door repairs can be dangerous and it is always advised to work with someone who knows what they are doing. This will help protect you and those around you, as well.

If you need help with your garage door and live in Moreno Valley, California, then call Rucks Garage Door anytime! Their experienced crew members know how to identify problems, repair both major and minor issues, install garage doors, and work with garage doors brands of all kinds. You are guaranteed to receive the best services for your garage door needs. Their trained experts will work with you to provide exceptional garage door services and get your garage door service requests addressed immediately!